How to install replace touch screen touch panel touch sensor touch membrane?
The touch screen panel that vicpas provide will take 12 monthes' Warranty base on non human damage. In order to keep our both benefit, please kindly follow below operating instructions.
1.Please check and make sure is integrated when you receive our product from the Express.
2.Before install, pls connect the panel to the mechine and get through electricity to check it workable or not, Notice: do not take off Double-sided adhesive in the both sides of the panel when you testing the function, although we would test and make sure it is working well before delivery.
3.If workable, put your broken machine and panel in a large and clean desk, first of all, remove the front foil cove in the front of the panel, then remove the broken panel from the machine and clean the glue and dust of the install place, make sure the new panel can be installed in a good way. Be careful when you removing, the broken panel is very dangerous to hurt your finger or somewhere, the most convinient way is damaged the broken panel to little piece then remove slowly and carefully.
4. Everything is ready, take off the Double-sided adhesive we provide arround the plastic cove of front, then remove the transparent protected film in the back side of the panel, stick it to the plastic cover which full with Double-sided adhesive little by little, pls pay more attention in the connector of the panel when you installed, this is the very important thing, If this process in wrong operating, the function of the panel would be damage, even unwork any more, and this not in grantee of us, therefore it must be most carefully.
5. After install the panel with the plastic, then connect the connector of the panel to the mainboard of the machine to test, if everything goes well, them install the new front foil cover to the plastic to protect the panel when being touched or operated.
Don’t worry, there is no so difficulte to install, do remember patient and careful is enough. We believe you could solve everything and do a perfect job.
If it doesn’t work any more with your machine, it’s dosen’t matter, pls pack them back in the box we sent to you, make sure they are well pack and then call DHL to delivery by economic express to us within 7days after you receive it. Over this time, we don’t accept any resend of goods. Hope all customers pay more attention on this.
If there has any question, pls don’t hesitate to let us know, we’ll try our best to help you as soon as possible.
Vicpas Touch Technology Co.,Ltd.